6 CFM Yellow Jacket Refrigerant Vacuum Pump
HVACTool.net Product Description
93560-SuperEvac Pump
6.0 CFM
2 Stage Rotary Vane
Field Blank off-15 Microns
Intake-1/4" and 1/2" Male Flare
1/2 HP - 1725 RPM
Internal Capacitor Thermal Overload-Temperature Rise 40?C.
Voltage (Single Phase)-115 Volt - 60 Cycle
Power Cord-8' Motor Mounted Switch
Oil Capacity-27 oz.
Dimensions-16.25" L x 6" x 11.5"
Net Weight-32 lbs. (14.3 kg)
A YELLOWJACKET pump pulls a vacuum down to 15 microns and better, eliminating contaminants that could cause system failure and no-charge call-backs. The smaller the micron number, the better the vacuum and the higher your productivity.
Pull fast. Every pump pulls a vacuum fast, giving you more time for more calls.
Pull for years. Each all-metal pump is engineered for the long run in the field. No plastic to crack or fall off. Heavy-duty steel handle screws into the housing for secure carrying. Durable base assembly provides stability and height.
Designed inside and out for PULLING power and reliability
High-efficiency 2-stage rotary vane design produces a deep vacuum field rating of 15 microns and lower.
Precisely machined and fitted parts with running clearances of less than .001" generate a very deep vacuum.
Exclusive built-in vacuum gauge shows evacuation progress down to the green 29" to 30" range when it?s time to use an electronic gauge for more precise readings in the low-micron range.
Large intake fittings (1/2" and 1/4") for maximized flow.
Hardened cap screws keep pumping module components tightly together.
Hardened drive shaft and large bearing provide long life.
Intake filter screen keeps damaging particles out of the pump.
Heavy-duty, high torque 1/2 HP, 1725 RPM motor reliably starts the pump when cold.
Improved drive coupling transmits consistent power from the motor.
Designed for OILING ease and reliability
Large diameter oil fill port for easy filling and less mess (also threaded for exhausting outside through a garden hose).
Large reservoir to reduce operating temperatures and dilute more contaminants.
Large sight glass for easy monitoring of oil levels.
Large brass oil drain plug for easy access.
Ball valve to isolate system and to change oil without losing vacuum in the system.
Internal intake check valve helps prevent oil back-up during power failure.
Gas ballast valve keeps oil cleaner longer.
Full Quality Check
As the only manufacturer that completely tests and runs in pumps at the factory, Ritchie Engineering ships with confidence that each pump will meet your expectations right from the box and for years to come on the job.
If this Yellow Jacket Refrigerant Vacuum Pump isn't the one you need, check us out at www.HVACtool.com and we have many more Yellow Jacket Refrigerant Vacuum Pumps and are anxious to provide the service tool that you need.
6.0 CFM
2 Stage Rotary Vane
Field Blank off-15 Microns
Intake-1/4" and 1/2" Male Flare
1/2 HP - 1725 RPM
Internal Capacitor Thermal Overload-Temperature Rise 40?C.
Voltage (Single Phase)-115 Volt - 60 Cycle
Power Cord-8' Motor Mounted Switch
Oil Capacity-27 oz.
Dimensions-16.25" L x 6" x 11.5"
Net Weight-32 lbs. (14.3 kg)
A YELLOWJACKET pump pulls a vacuum down to 15 microns and better, eliminating contaminants that could cause system failure and no-charge call-backs. The smaller the micron number, the better the vacuum and the higher your productivity.
Pull fast. Every pump pulls a vacuum fast, giving you more time for more calls.
Pull for years. Each all-metal pump is engineered for the long run in the field. No plastic to crack or fall off. Heavy-duty steel handle screws into the housing for secure carrying. Durable base assembly provides stability and height.
Designed inside and out for PULLING power and reliability
High-efficiency 2-stage rotary vane design produces a deep vacuum field rating of 15 microns and lower.
Precisely machined and fitted parts with running clearances of less than .001" generate a very deep vacuum.
Exclusive built-in vacuum gauge shows evacuation progress down to the green 29" to 30" range when it?s time to use an electronic gauge for more precise readings in the low-micron range.
Large intake fittings (1/2" and 1/4") for maximized flow.
Hardened cap screws keep pumping module components tightly together.
Hardened drive shaft and large bearing provide long life.
Intake filter screen keeps damaging particles out of the pump.
Heavy-duty, high torque 1/2 HP, 1725 RPM motor reliably starts the pump when cold.
Improved drive coupling transmits consistent power from the motor.
Designed for OILING ease and reliability
Large diameter oil fill port for easy filling and less mess (also threaded for exhausting outside through a garden hose).
Large reservoir to reduce operating temperatures and dilute more contaminants.
Large sight glass for easy monitoring of oil levels.
Large brass oil drain plug for easy access.
Ball valve to isolate system and to change oil without losing vacuum in the system.
Internal intake check valve helps prevent oil back-up during power failure.
Gas ballast valve keeps oil cleaner longer.
Full Quality Check
As the only manufacturer that completely tests and runs in pumps at the factory, Ritchie Engineering ships with confidence that each pump will meet your expectations right from the box and for years to come on the job.
If this Yellow Jacket Refrigerant Vacuum Pump isn't the one you need, check us out at www.HVACtool.com and we have many more Yellow Jacket Refrigerant Vacuum Pumps and are anxious to provide the service tool that you need.
|
 |
  |
